0.43 Inch Single Digit 7 Segment LED Display

The 0.43 inch single digit 7-segment LED display is a compact and efficient digital display solution that can be used in many electronic devices such as home appliances (e.g. microwave ovens, ovens), industrial equipment (e.g. thermostats, counters), consumer electronics (e.g. calculators, clocks), etc.

Send Inquiry

Product Introduction

The 0.43-inch single-digit 7-segment LED display is a compact and efficient digital display solution that can be used in many electronic devices, such as household appliances (such as microwave ovens, ovens), industrial equipment (such as thermostats, counters), consumer electronics (such as calculators, clocks), etc. This display uses seven light-emitting diodes (LEDs) in different combinations to display single numbers (from 0 to 9) and some alphabetic symbols. Its size is 0.43 inches (about 10.92 mm), which is very suitable for space-constrained applications.

This display has many advantages. First, the operating voltage is low, usually between 1.7 and 3 volts, the maximum operating current is XX mA, the typical brightness is XX cd/m², and the viewing angle is ±XX degrees. Such technical parameters help reduce energy consumption and extend battery life. Secondly, due to the use of LED technology, it has a long life, high reliability, good environmental adaptability, and can work stably under various temperature conditions. And the character appearance is good, and it is easy to install on a printed circuit board (PCB) or socket. During installation, attention should be paid to the correct position of the pins to avoid short circuits; during use, the operating voltage should be kept within the specified range to prevent damage to the LED.

In terms of structure, this type of display screen is divided into two types: common anode and common cathode. In the common anode display screen, the positive poles of all LEDs are connected together, and digital display is achieved by controlling the negative poles of different LEDs; while the common cathode display screen is the opposite, the negative poles of all LEDs are connected together, and the display is achieved by controlling the positive pole. This design makes the control circuit relatively simple and easy to be compatible with standard drivers.

01001